Distinguish between marble wax and crystallization

marble floor is modern decoration indispensable main natural marble materials, especially the more by its natural beauty that feature is broad consumer pro-gaze. But almost all of the natural marble material, no matter how careful use after a period of time will have different degrees of scratch and slowly lose luster, has greatly affected the original marble material surface appearance. Replace or refurbished enormous consumption, if ground damage is not particularly serious is unfavorable take above practices.

Wax as the first generation of marble nursing technique, is still widely used. This technology rely on water let up sex low granite plastic materials, formed in marble material surface coating substrate. But the hardness bottom, easy discoloration, must often polishing wax, enormous consumption for resources, but also in the process in each containing wax used within the black on wax alloy sand pads, serious injury, and the high solvent marble surface on wax strong alkali more infiltration marble formation cracking. With the new technology development first generation technology will reduce use.

Marble, granite, etc crystallization operating procedures

Ingredient: marble specular mirror reengineering powder

Function: applied to marble mirror the brilliant hard treatment, protect the marble surface from scratch and maintain bright mirror commonly, waterproof, anticorrosion, more than waxing nursing.

This product for wet operation, in the shortest possible time, crystal marble specular reinventing for dealing with due to causes lose luster wear of the marble material surface.

Features:
1) won't produce caused by the steel wool ShiMian scratch
2) won't make ShiMian discoloration or leave yellow rust
3) ShiMian bright water, extremely rich administrative levels feels
4) low cost, time saving, provincial artificially
5) have prevent besmirch deep inner, strengthen marble effect such as abrasion, prevent strokes

Sandstone:
1) using cleaning machine first will lidan surface thoroughly clean
2) using pure water will crystalline powder move into mushy, besmear is on abrasive pad.
3) use 175 turn/minutes 45KG brushing machine load during operation started grinding, maintain the ground wet.
4) when lidan surface after crystal into specular suck the ground with bibulous machine residual paste.
5) water blot.
6) use polishing pad polishing, make the ground dry completely, bright as a mirror. Compared with wax crystals