The amount applied for:
1 liter can handle 20 to 30 square meters, 30 to 50 ml per square meter, according to different kinds of stone, tiles may be.
Construction of pre-treatment:
First, thoroughly clean the stone, tile surfaces (including water spots, rust, yellow, white China, mildew and other cleaning.) If stone, tile surface has been waxed, you should use the S-9471 oil, wax removers to wax. (In order to effectively penetrate the protective agent stone, tile internal)
Second, dry stone, tile surface. Using the oven or gas gun, or use of the sun. (S to the water vapor out of the pores for the purpose, to ensure a completely dry state S treatment Protectant)
Third, cooling the surface S to 40 ~ 50C. (In this temperature range can be applied as protective agent was the best treatment effect)
Fourth, to maintain good ventilation construction sites.
Coating:
First, the uniform coating protectants, about 30 per square meter to 50 ml. (Use brush or spray gun)
Sandstone, put it aside for 5 to 10 minutes. Put it aside for a period of time is to allow full penetration of protective agent)
Third, use a clean cloth (wool Lun best) to the surface of the protective agent residues in S removed.
Fourth, for the three special circumstances to be coated, coating the second coating is required with the previous time interval of 30 minutes and then repeat the above steps.
Health: health in a cool dry place 12 to 24 hours before proceeding to the other installation. The Nature Conservancy achieve the best results after five days.
First, the product operation is also achieved at room temperature protective effect, but will affect the penetration depth, thereby reducing the effective life of protective agent.
Second, a large area with a small area test before the trip.
Third, read the packaging before use instructions or operating procedures.
Pharmacy Storage:
First, the cover cap after use.
Second, be stored in the sun, high temperatures.
Third, the storage of fire and water are forbidden to penetrate
1 liter can handle 20 to 30 square meters, 30 to 50 ml per square meter, according to different kinds of stone, tiles may be.
Construction of pre-treatment:
First, thoroughly clean the stone, tile surfaces (including water spots, rust, yellow, white China, mildew and other cleaning.) If stone, tile surface has been waxed, you should use the S-9471 oil, wax removers to wax. (In order to effectively penetrate the protective agent stone, tile internal)
Second, dry stone, tile surface. Using the oven or gas gun, or use of the sun. (S to the water vapor out of the pores for the purpose, to ensure a completely dry state S treatment Protectant)
Third, cooling the surface S to 40 ~ 50C. (In this temperature range can be applied as protective agent was the best treatment effect)
Fourth, to maintain good ventilation construction sites.
Coating:
First, the uniform coating protectants, about 30 per square meter to 50 ml. (Use brush or spray gun)
Sandstone, put it aside for 5 to 10 minutes. Put it aside for a period of time is to allow full penetration of protective agent)
Third, use a clean cloth (wool Lun best) to the surface of the protective agent residues in S removed.
Fourth, for the three special circumstances to be coated, coating the second coating is required with the previous time interval of 30 minutes and then repeat the above steps.
Health: health in a cool dry place 12 to 24 hours before proceeding to the other installation. The Nature Conservancy achieve the best results after five days.
First, the product operation is also achieved at room temperature protective effect, but will affect the penetration depth, thereby reducing the effective life of protective agent.
Second, a large area with a small area test before the trip.
Third, read the packaging before use instructions or operating procedures.
Pharmacy Storage:
First, the cover cap after use.
Second, be stored in the sun, high temperatures.
Third, the storage of fire and water are forbidden to penetrate
没有评论:
发表评论