The best way to marble surface maintenance

I. Introduction crystal surface treatment marble

    Crystal surface treatment is the best way to maintain the marble surface, which is a chemical process. The principle is the use of crystal surface treatment agent on the marble surface with heavy-duty friction processor, a dual role in the chemistry and physics under the granite surface to form a hard crystalline hard and compact layer of the crystal, so that marble face to be easily damaged, are not easy to stick dye stain to ensure the essential characteristics of the marble. Other words, the crystal layer to isolate the source of pollution and marble, the pollution, the damage is only the crystallization of the marble layer above it.

    Sandstone is the way of the past followed a form of protection, it is a physical process. Simply put, that is coated on the ground cover (wax) to protect the floor surface. Routine maintenance will only cover (wax) for cleaning and maintenance, this coverage does not reflect the way the natural texture of natural marble, the use of short cycle. Wax from waxing regularly, continuously, repeatedly wax, water and other material consumption, the sky mostly alkaline water, wax, marble and corrosion because of the rapid aging of calcium carbonate. High corrosion resistance of granite quartz, feldspar and mica, but is impatient corrosion, pitting then expanding deeper becomes uneven.

    marble crystal surface treatment is the best way to maintain the marble surface, it did not change the structure of marble, it is not coated with a layer of mulch, so do not change the texture of the original marble. And through the crystal surface treatment, the marble surface molecules more compact, shiny brightness significantly improved, so that marble face is more beautiful, more noble. Crystal surface treatment in the continuous accumulation of the effect of the nursing process and value.

    Limestone, the advantages of crystal surface treatment marble and Trends

    Reasonable care and periodic crystal face, not only can get the best care and maintenance effects, and care and maintenance are at the lowest cost, best value for money.

    The mid-80s of last century, European and American markets has been widely used approach to conservation of crystal face of marble. In China, the mid-90s in the last century, before the introduction and promotion of crystal surface treatment, with the crystal surface treatment products become more sophisticated and professional, already targeted on the marble, granite and other marble and some man-made bricks.

    Crystal surface treatment in our country's future development will fully replace the traditional marble waxing, face wax treatment in the future will be confined to PVC, gravity floor, anti-static flooring and other applications.

    Third, the effect of marble and principles of crystal surface treatment

    Principles: crystal surface treatment should be the new marble surface, or the renovation of the marble surface began, and for regular maintenance, so to maintain perfect marble surface, look as new.

    Crystal surface treatment of the three major principles: 1, clean; 2, flat; 3, dry.

    Fourth, marble products, the difference between crystal surface treatment and Development marble crystal surface treatment products according to operating hours are: hardened agent, with light agents, fillers, abrasives, care agent.

    marble crystal surface treatment essentially different product categories: such as

    Powder - a filling, the early effect of good, low chemical reactivity, adaptability limitations.

    Travertine - no filling, the early results better, the chemical reaction and high, wide applicability.

    Fifth, construction of marble crystal surface treatment technology

    1. Marble crystal surface treatment

    1) crystal planes of marble tools: multi-functional cleaning machine, red, scouring pads, water cleaner, white polishing pads and other ancillary equipment.

    2) the use of agents: K2, K3 crystalline powder and marble maintenance agent, neutral detergent.

    3) Specific steps: use of multi-function floor cleaning machines, scouring pad with a red, crystalline powder with the marble, the sameamount of water spilled on the ground even turn grinding, polishing brush machine should be horizontal, back and forth about 12-16 times or so. The greater the mechanical torque during operation, the better. After grinding put a small amount of natural fiber mats sprayed with the "marble maintenance agent" re-polish the marble so that you can increase the hardness and gloss crystal surface. After the marble through the crystal surface treatment such as the new smooth surface gloss can reach 80 degrees.

    4) Note: regular use of dust mop every day to keep the marble dust surface clean. Operations do not use black wax from the polishing pad. Do not wash the cleaning brush cleaning, but rather use the red, white scouring pad cleaning brush surface hardness and wear large, resulting in poor surface finish.

    2. Granite crystal surface treatment

    1) the use of tools: multi-functional cleaning machine, stainless steel wire pad, polishing machines, suction vacuum cleaners and other auxiliary equipment.

    2) the use of agents: the hard marble crystal powder and marble maintenance agent.

    3) Specific steps: first hard crystal powder and marble maintenance agent was mixed well, and coated with a uniform coating on the ground, and then polishing pad with polished stainless steel wire to the mixture to dry. Crystal hard time dealing with the scope to not more than 2 square meters for the best, always check the stainless steel grinding process is filled with too much cushion silk mixture, if flooded would be replaced immediately. After the granite through the crystal surface treatment such as the new smooth surface gloss can reach 70 degrees.

    4) Note: Every time the surface of marble dust to keep clean. Remember that each time the tool after the completion of clean tidy, scouring pads and stainless steel wire pad must be kept clean to ensure the effectiveness of the work to ensure that the effect of crystal surface treatment marble.